Cabinet Refacing in Summerside
iPaint Painting provides professional cabinet refacing services in Summerside and throughout Edmonton, replacing worn or dated cabinet doors and drawer fronts with brand new ones while preserving the structurally sound cabinet boxes that Summerside builders installed during the community’s rapid growth from the 1980s through the 2000s. Homes in Broadmoor Estates, Heritage Hills, and Nottingham were built with solid plywood and hardwood cabinet construction that still performs flawlessly after decades — but the cathedral-arch oak doors and honey-stained finishes look dated by today’s standards. Cabinet refacing gives you a completely modern kitchen with new shaker, slab, or raised-panel doors, updated soft-close hinges, and fresh hardware, all installed on your existing boxes with matching veneer on the face frames. Typical Summerside kitchen refacing costs $5,000–$12,000 — a fraction of the $20,000–$40,000+ that full cabinet replacement would run. Whether you’re modernizing a 1990s kitchen in Lakeland Ridge near Wye Road, converting builder-grade thermofoil in Emerald Hills, or updating raised-panel maple in Clover Bar Ranch along the North Saskatchewan River valley, iPaint’s certified team handles every step. Every project includes a free consultation, detailed written estimate, and 5-year written workmanship warranty. Call 780-938-9555 for your free cabinet refacing estimate in Summerside.
Certified
Warranty
156 Reviews
In-House Team
New Doors, New Hardware, Same Solid Boxes
Cabinet refacing replaces the visible elements of your Summerside kitchen while preserving the structurally sound cabinet boxes underneath.
Cabinet Doors
Brand new doors in shaker, slab, raised-panel, or flat-panel profiles. Measured, ordered, and precision-fitted to your existing Summerside cabinet boxes.
Drawer Fronts
New drawer fronts matched to your door style for a cohesive, factory-fresh look across every cabinet opening in your kitchen.
Face Frame Veneer
Cabinet box face frames are veneered or finished to match your new doors, creating a seamless, unified look throughout your kitchen.
New Hardware
Soft-close hinges, modern pulls, and knobs selected to complement your new door style. Updated hardware transforms the entire kitchen feel.
End Panels
Exposed cabinet ends are finished with matching panels for a built-in, custom look on peninsula and island units throughout your kitchen.
Crown Moulding
New or updated crown moulding and light valances to complete the kitchen transformation from top to bottom in your Summerside home.
Island Cabinetry
Kitchen island doors, panels, and storage refaced to match your perimeter cabinets for a unified, designer kitchen look.
Bathroom Vanities
Bathroom vanity doors and drawer fronts replaced to match your kitchen or create a standalone updated look in Edmonton homes.
Not sure if refacing is right for your Summerside kitchen? We also offer cabinet refinishing for a colour change on existing doors and cabinet painting for a lighter-touch refresh. Call us — we’ll help you decide.
From First Call to Modern Kitchen
We’ve refined our cabinet refacing process over 15 years, serving Summerside homeowners who want a modern kitchen without the cost and disruption of a full renovation.
Free Consultation
Call 780-938-9555 or fill out our online form. We’ll schedule your free in-home cabinet assessment at your Summerside address — typically within 48 hours.
Assessment & Door Selection
We inspect your cabinet boxes for structural integrity, measure every opening, and help you choose the perfect door style, colour, and hardware for your Edmonton kitchen.
Detailed Written Estimate
You receive a clear proposal listing every door, drawer front, hinge, pull, and veneer panel with pricing. No surprises — the price we quote is the price you pay.
Old Door Removal
Existing doors, drawer fronts, and hardware are carefully removed. Cabinet boxes are cleaned, inspected, and prepared for new veneer on face frames.
New Doors & Veneer Installed
Brand new doors and drawer fronts are precision-fitted. Face frames veneered to match. New soft-close hinges, pulls, and knobs installed throughout your Summerside kitchen.
Final Walkthrough
We inspect every door, drawer, and hinge with you. Everything is aligned, cleaned, and your 5-year written workmanship warranty is activated. Your kitchen looks brand new.
Why Summerside Homeowners Choose iPaint for Cabinet Refacing
Cabinet refacing demands precise measurement, quality materials, and expert installation — that’s exactly what we deliver across Edmonton.
In-House Team, No Subcontractors
Every installer on our crew is a full-time, in-house employee. No rotating strangers in your Summerside home, no subcontractors, no middlemen. When you hire iPaint, you get iPaint — the same trained team from our south Edmonton shop, just 20 minutes from Edmonton via Anthony Henday Drive.
Certified & Experienced
Mourad holds a Painter and Decorator Certification, plus MPI and Lead Safety (RRP) credentials. With 15+ years of cabinet work across the Edmonton metro area, he knows which Summerside cabinet box constructions hold up to refacing and which are better served by refinishing or replacement.
Premium Door Styles & Materials
We source high-quality replacement doors in shaker, slab, raised-panel, and flat-panel profiles — available in solid wood, MDF, or thermofoil finishes. Every door is measured to your exact cabinet openings for a precision fit that looks custom, not builder-grade.
Fraction of Replacement Cost
Full cabinet replacement in Summerside runs $20,000–$40,000+ including demolition, plumbing, countertop refitting, and installation. Cabinet refacing delivers a completely modern look for $5,000–$12,000 — keeping your countertops, plumbing, and layout exactly where they are.
5-Year Written Warranty
Every cabinet surface we reface is backed by a 5-year written workmanship warranty. If doors warp, veneer lifts, or hardware fails due to our installation — we come back and make it right, no questions asked. That’s our promise to every Summerside homeowner.
No Hidden Costs — Ever
The price on your written estimate is the price you pay. Period. We don’t surprise you with extra charges for hardware, veneer, or “additional fitting.” Same pricing as Edmonton — no travel surcharge for Summerside or anywhere in Edmonton.
Premium Finishes for Summerside Cabinets
We pair new doors and hardware with professional-grade finishing products from trusted brands — ensuring your refaced cabinets look stunning and last for years.
Benjamin Moore
The gold standard in cabinet finishing. Benjamin Moore’s Advance line is purpose-built for cabinetry — delivering a factory-smooth, furniture-like finish with exceptional hardness and durability. Ideal for Summerside kitchens where high humidity from cooking meets Alberta’s dry winter air.
Sherwin-Williams
Sherwin-Williams ProClassic and Emerald Urethane Trim Enamel deliver outstanding levelling and a glass-smooth finish on cabinet face frames and trim. Exceptional adhesion on the veneer surfaces used in cabinet refacing projects across Edmonton.
Cloverdale
A trusted Western Canadian brand delivering professional-grade performance. Cloverdale’s cabinet and trim products offer excellent adhesion and durability — especially well-suited for Alberta’s unique climate conditions and the temperature swings Summerside homeowners experience.
During your free consultation, we’ll recommend the best door material, finish, and hardware for your kitchen based on your style preferences, usage patterns, and budget.
Cabinet Refacing Pricing for Summerside
Same pricing as Edmonton — no travel surcharges for Summerside or Edmonton.
Every estimate is detailed, transparent, and guaranteed in writing. Request your free estimate or call 780-938-9555.
Why Summerside Kitchens Are Perfect for Cabinet Refacing
Summerside is the urban core of Edmonton, Alberta — Canada’s largest specialized municipality, located directly east of Edmonton with over 72,000 residents. The community experienced three major building booms that each left a distinctive kitchen cabinet style, and all three are now prime candidates for refacing rather than costly replacement.
1980s Foundations: Nottingham, Brentwood & Woodbridge Farms
Summerside’s early growth neighbourhoods along Sherwood Drive and Baseline Road produced thousands of kitchens with solid oak cabinet boxes topped by raised-panel or cathedral-arch doors in medium-brown stain. Nottingham, near Broadmoor Lake Park and Nottingham School, features two-storey family homes where the kitchen boxes are built from quality plywood and hardwood that has held up superbly over 35+ years. Woodbridge Farms, situated near Heritage Hills Golf Course along the corridor between Sherwood Drive and Clover Bar Road, shares the same era of construction. These cabinet boxes are too solid to rip out — they just need new doors in a modern shaker or slab profile to look current again.
1990s Premium: Broadmoor Estates & Heritage Hills
Broadmoor Estates, located near Broadmoor Lake and the Edmonton Library, features executive homes with 3,000+ square-foot floor plans and large kitchens with 40+ cabinet doors. The 1990s builders used premium plywood box construction with cathedral-arch or raised-panel oak doors that were top-of-the-line in their era. Heritage Hills, set along Heritage Drive south of Baseline Road, introduced early open-concept kitchens to Summerside with solid maple cabinet construction. Both neighbourhoods are the ideal demographic for refacing: homeowners who invested significantly in their original kitchens and now want a modern update without tearing out $40,000 worth of still-solid cabinetry. If you’re also considering a full kitchen refresh, our interior painting service in Summerside pairs naturally with cabinet refacing.
2000s Expansion: Lakeland Ridge, Clover Bar Ranch & Emerald Hills
Lakeland Ridge, developed between 2005 and 2015 south of Wye Road, features builder-grade thermofoil flat-panel or basic MDF raised-panel doors that are now peeling, bubbling, and delaminating near stovetops and dishwashers — while the particleboard and MDF cabinet boxes underneath are still perfectly serviceable. Clover Bar Ranch, nestled east of Clover Bar Road near the North Saskatchewan River valley, has estate properties with larger kitchens. Emerald Hills, Summerside’s newest major development near Emerald Hills Leisure Centre, has kitchens where even 10-year-old thermofoil is showing wear. For all three communities, replacing peeling thermofoil doors with solid wood or premium MDF shaker doors transforms the kitchen completely at a fraction of full replacement cost.
What’s Included in Every Summerside Cabinet Refacing Project
When you hire iPaint for cabinet refacing in Summerside, you get a complete, turnkey transformation — not just a set of new doors dropped off at your doorstep.
- Full in-home assessment — cabinet boxes inspected for structural integrity, every opening measured at your Summerside address
- Door style and colour consultation — shaker, slab, raised-panel, or flat-panel in the colour and material of your choice
- Hardware selection guidance — soft-close hinges, pulls, and knobs that complement your new door style
- Old door and hardware removal — careful removal and disposal of existing doors, drawer fronts, and hardware
- Face frame veneer or finishing — exposed cabinet box frames matched to your new door colour
- Precision door and drawer front installation — every new piece fitted, aligned, and adjusted for perfect operation
- End panel installation — exposed cabinet sides finished with matching panels
- Crown moulding and trim — updated or added to complete the transformation
- Final walkthrough and alignment check — every door and drawer tested for smooth operation
- Full cleanup — your kitchen returned the way it was, or better
- 5-year written workmanship warranty — activated at project completion
Summerside Cabinet Refacing Pricing Guide
Pricing is identical to Edmonton — no travel surcharges for Summerside or Edmonton. Our shop at 9821 33 Ave NW is just 20 minutes from Summerside via Anthony Henday Drive. Typical ranges:
- Small kitchen (10–20 doors) — $5,000–$7,000 in shaker or slab style, 5–7 days
- Average kitchen (20–30 doors) — $7,000–$9,000, the most common size in Nottingham and Westboro
- Executive kitchen (30–50+ doors) — $9,000–$12,000 in Broadmoor Estates and Heritage Hills
- Bathroom vanity refacing — $1,500–$3,500 for single or double vanities
- Pre-sale kitchen refresh — $4,000–$7,000 to modernize a kitchen before listing in Edmonton’s competitive real estate market
Want to change the colour but keep your door style? Cabinet refinishing in Summerside strips and spray-finishes your existing doors. Need the walls done at the same time? Our interior painting team handles both projects for maximum efficiency.
Cabinet Refacing Across Summerside & Edmonton
We provide professional cabinet refacing services throughout Summerside, Edmonton, and all surrounding communities.
Primary Service Area
Executive & Premium Neighbourhoods
Established Neighbourhoods
Also Serving
Summerside, Edmonton — proudly served by iPaint Painting since 2011
Cabinet Refacing Transformations
Real cabinet refacing projects from Summerside and area homes. See how new doors and hardware completely transform a kitchen.
Before
After
Before
After
Before
After
Before
After
More Ways We Can Help in Summerside
Cabinet refacing is just one of our specialities. Explore our other services to get everything done by one trusted team.
Cabinet Refacing FAQs — Summerside
Straight answers to the questions Summerside homeowners ask most about cabinet refacing costs, timelines, and options.
How much does cabinet refacing cost in Summerside?
Cabinet refacing in Summerside ranges from $7,000 for a compact townhouse kitchen to $18,000 for an executive home near the lake. Standard builder kitchens with 20 to 25 doors cost $8,000 to $13,000. Refacing includes brand new doors and drawer fronts, face frame veneering, new hardware, soft-close hinges, and professional installation.
What door styles are popular in Summerside?
White shaker doors are the most popular choice, delivering a clean, modern look that transforms builder-grade kitchens. Grey shaker is second. Slab doors in white or light grey are popular with homeowners wanting a contemporary aesthetic. Raised-panel doors are less common since Summerside's newer construction style is modern rather than traditional.
How long does cabinet refacing take in Summerside?
A typical 20 to 25 door kitchen takes 5 to 8 working days from measurement to completion. Doors are custom-fabricated (2 to 3 weeks lead time), then on-site installation takes 3 to 5 days. Your kitchen remains functional throughout.
Can you reface peeling thermofoil cabinets in Summerside?
Refacing is the ideal solution for peeling thermofoil. Since refacing replaces your doors entirely with new solid wood or MDF doors, the condition of the old thermofoil does not matter. We remove old doors, veneer the cabinet box face frames, and install brand new doors in your chosen style. The result is a kitchen that looks completely new.
Should I reface or refinish my Summerside kitchen cabinets?
Choose refacing for a complete style change (flat thermofoil to shaker, for example), when doors are damaged or peeling, or when you want new hardware and soft-close functionality. Choose refinishing when your solid wood doors are structurally sound and you want a new colour. We assess your cabinets at the free consultation and recommend the best option.
Summerside’s Trusted Cabinet Refacing Team
Whether it’s a full kitchen refacing in Broadmoor Estates, a bathroom vanity update, or just a consultation to explore your options — let’s talk about your Summerside cabinet project. Free estimates, no pressure.