Cabinet Refacing in Sherwood Park
iPaint Painting provides professional cabinet refacing services in Sherwood Park and throughout Strathcona County, replacing worn or dated cabinet doors and drawer fronts with brand new ones while preserving the structurally sound cabinet boxes that Sherwood Park builders installed during the community’s rapid growth from the 1980s through the 2000s. Homes in Broadmoor Estates, Heritage Hills, and Nottingham were built with solid plywood and hardwood cabinet construction that still performs flawlessly after decades — but the cathedral-arch oak doors and honey-stained finishes look dated by today’s standards. Cabinet refacing gives you a completely modern kitchen with new shaker, slab, or raised-panel doors, updated soft-close hinges, and fresh hardware, all installed on your existing boxes with matching veneer on the face frames. Typical Sherwood Park kitchen refacing costs $5,000–$12,000 — a fraction of the $20,000–$40,000+ that full cabinet replacement would run. Whether you’re modernizing a 1990s kitchen in Lakeland Ridge near Wye Road, converting builder-grade thermofoil in Emerald Hills, or updating raised-panel maple in Clover Bar Ranch along the North Saskatchewan River valley, iPaint’s certified team handles every step. Every project includes a free consultation, detailed written estimate, and 5-year written workmanship warranty. Call 780-938-9555 for your free cabinet refacing estimate in Sherwood Park.
Certified
Warranty
156 Reviews
In-House Team
New Doors, New Hardware, Same Solid Boxes
Cabinet refacing replaces the visible elements of your Sherwood Park kitchen while preserving the structurally sound cabinet boxes underneath.
Cabinet Doors
Brand new doors in shaker, slab, raised-panel, or flat-panel profiles. Measured, ordered, and precision-fitted to your existing Sherwood Park cabinet boxes.
Drawer Fronts
New drawer fronts matched to your door style for a cohesive, factory-fresh look across every cabinet opening in your kitchen.
Face Frame Veneer
Cabinet box face frames are veneered or finished to match your new doors, creating a seamless, unified look throughout your kitchen.
New Hardware
Soft-close hinges, modern pulls, and knobs selected to complement your new door style. Updated hardware transforms the entire kitchen feel.
End Panels
Exposed cabinet ends are finished with matching panels for a built-in, custom look on peninsula and island units throughout your kitchen.
Crown Moulding
New or updated crown moulding and light valances to complete the kitchen transformation from top to bottom in your Sherwood Park home.
Island Cabinetry
Kitchen island doors, panels, and storage refaced to match your perimeter cabinets for a unified, designer kitchen look.
Bathroom Vanities
Bathroom vanity doors and drawer fronts replaced to match your kitchen or create a standalone updated look in Strathcona County homes.
Not sure if refacing is right for your Sherwood Park kitchen? We also offer cabinet refinishing for a colour change on existing doors and cabinet painting for a lighter-touch refresh. Call us — we’ll help you decide.
From First Call to Modern Kitchen
We’ve refined our cabinet refacing process over 15 years, serving Sherwood Park homeowners who want a modern kitchen without the cost and disruption of a full renovation.
Free Consultation
Call 780-938-9555 or fill out our online form. We’ll schedule your free in-home cabinet assessment at your Sherwood Park address — typically within 48 hours.
Assessment & Door Selection
We inspect your cabinet boxes for structural integrity, measure every opening, and help you choose the perfect door style, colour, and hardware for your Strathcona County kitchen.
Detailed Written Estimate
You receive a clear proposal listing every door, drawer front, hinge, pull, and veneer panel with pricing. No surprises — the price we quote is the price you pay.
Old Door Removal
Existing doors, drawer fronts, and hardware are carefully removed. Cabinet boxes are cleaned, inspected, and prepared for new veneer on face frames.
New Doors & Veneer Installed
Brand new doors and drawer fronts are precision-fitted. Face frames veneered to match. New soft-close hinges, pulls, and knobs installed throughout your Sherwood Park kitchen.
Final Walkthrough
We inspect every door, drawer, and hinge with you. Everything is aligned, cleaned, and your 5-year written workmanship warranty is activated. Your kitchen looks brand new.
Why Sherwood Park Homeowners Choose iPaint for Cabinet Refacing
Cabinet refacing demands precise measurement, quality materials, and expert installation — that’s exactly what we deliver across Strathcona County.
In-House Team, No Subcontractors
Every installer on our crew is a full-time, in-house employee. No rotating strangers in your Sherwood Park home, no subcontractors, no middlemen. When you hire iPaint, you get iPaint — the same trained team from our south Edmonton shop, just 20 minutes from Strathcona County via Anthony Henday Drive.
Certified & Experienced
Mourad holds a Painter and Decorator Certification, plus MPI and Lead Safety (RRP) credentials. With 15+ years of cabinet work across the Edmonton metro area, he knows which Sherwood Park cabinet box constructions hold up to refacing and which are better served by refinishing or replacement.
Premium Door Styles & Materials
We source high-quality replacement doors in shaker, slab, raised-panel, and flat-panel profiles — available in solid wood, MDF, or thermofoil finishes. Every door is measured to your exact cabinet openings for a precision fit that looks custom, not builder-grade.
Fraction of Replacement Cost
Full cabinet replacement in Sherwood Park runs $20,000–$40,000+ including demolition, plumbing, countertop refitting, and installation. Cabinet refacing delivers a completely modern look for $5,000–$12,000 — keeping your countertops, plumbing, and layout exactly where they are.
5-Year Written Warranty
Every cabinet surface we reface is backed by a 5-year written workmanship warranty. If doors warp, veneer lifts, or hardware fails due to our installation — we come back and make it right, no questions asked. That’s our promise to every Sherwood Park homeowner.
No Hidden Costs — Ever
The price on your written estimate is the price you pay. Period. We don’t surprise you with extra charges for hardware, veneer, or “additional fitting.” Same pricing as Edmonton — no travel surcharge for Sherwood Park or anywhere in Strathcona County.
Premium Finishes for Sherwood Park Cabinets
We pair new doors and hardware with professional-grade finishing products from trusted brands — ensuring your refaced cabinets look stunning and last for years.
Benjamin Moore
The gold standard in cabinet finishing. Benjamin Moore’s Advance line is purpose-built for cabinetry — delivering a factory-smooth, furniture-like finish with exceptional hardness and durability. Ideal for Sherwood Park kitchens where high humidity from cooking meets Alberta’s dry winter air.
Sherwin-Williams
Sherwin-Williams ProClassic and Emerald Urethane Trim Enamel deliver outstanding levelling and a glass-smooth finish on cabinet face frames and trim. Exceptional adhesion on the veneer surfaces used in cabinet refacing projects across Strathcona County.
Cloverdale
A trusted Western Canadian brand delivering professional-grade performance. Cloverdale’s cabinet and trim products offer excellent adhesion and durability — especially well-suited for Alberta’s unique climate conditions and the temperature swings Sherwood Park homeowners experience.
During your free consultation, we’ll recommend the best door material, finish, and hardware for your kitchen based on your style preferences, usage patterns, and budget.
Cabinet Refacing Pricing for Sherwood Park
Same pricing as Edmonton — no travel surcharges for Sherwood Park or Strathcona County.
Every estimate is detailed, transparent, and guaranteed in writing. Request your free estimate or call 780-938-9555.
Why Sherwood Park Kitchens Are Perfect for Cabinet Refacing
Sherwood Park is the urban core of Strathcona County, Alberta — Canada’s largest specialized municipality, located directly east of Edmonton with over 72,000 residents. The community experienced three major building booms that each left a distinctive kitchen cabinet style, and all three are now prime candidates for refacing rather than costly replacement.
1980s Foundations: Nottingham, Brentwood & Woodbridge Farms
Sherwood Park’s early growth neighbourhoods along Sherwood Drive and Baseline Road produced thousands of kitchens with solid oak cabinet boxes topped by raised-panel or cathedral-arch doors in medium-brown stain. Nottingham, near Broadmoor Lake Park and Nottingham School, features two-storey family homes where the kitchen boxes are built from quality plywood and hardwood that has held up superbly over 35+ years. Woodbridge Farms, situated near Heritage Hills Golf Course along the corridor between Sherwood Drive and Clover Bar Road, shares the same era of construction. These cabinet boxes are too solid to rip out — they just need new doors in a modern shaker or slab profile to look current again.
1990s Premium: Broadmoor Estates & Heritage Hills
Broadmoor Estates, located near Broadmoor Lake and the Strathcona County Library, features executive homes with 3,000+ square-foot floor plans and large kitchens with 40+ cabinet doors. The 1990s builders used premium plywood box construction with cathedral-arch or raised-panel oak doors that were top-of-the-line in their era. Heritage Hills, set along Heritage Drive south of Baseline Road, introduced early open-concept kitchens to Sherwood Park with solid maple cabinet construction. Both neighbourhoods are the ideal demographic for refacing: homeowners who invested significantly in their original kitchens and now want a modern update without tearing out $40,000 worth of still-solid cabinetry. If you’re also considering a full kitchen refresh, our interior painting service in Sherwood Park pairs naturally with cabinet refacing.
2000s Expansion: Lakeland Ridge, Clover Bar Ranch & Emerald Hills
Lakeland Ridge, developed between 2005 and 2015 south of Wye Road, features builder-grade thermofoil flat-panel or basic MDF raised-panel doors that are now peeling, bubbling, and delaminating near stovetops and dishwashers — while the particleboard and MDF cabinet boxes underneath are still perfectly serviceable. Clover Bar Ranch, nestled east of Clover Bar Road near the North Saskatchewan River valley, has estate properties with larger kitchens. Emerald Hills, Sherwood Park’s newest major development near Emerald Hills Leisure Centre, has kitchens where even 10-year-old thermofoil is showing wear. For all three communities, replacing peeling thermofoil doors with solid wood or premium MDF shaker doors transforms the kitchen completely at a fraction of full replacement cost.
What’s Included in Every Sherwood Park Cabinet Refacing Project
When you hire iPaint for cabinet refacing in Sherwood Park, you get a complete, turnkey transformation — not just a set of new doors dropped off at your doorstep.
- Full in-home assessment — cabinet boxes inspected for structural integrity, every opening measured at your Sherwood Park address
- Door style and colour consultation — shaker, slab, raised-panel, or flat-panel in the colour and material of your choice
- Hardware selection guidance — soft-close hinges, pulls, and knobs that complement your new door style
- Old door and hardware removal — careful removal and disposal of existing doors, drawer fronts, and hardware
- Face frame veneer or finishing — exposed cabinet box frames matched to your new door colour
- Precision door and drawer front installation — every new piece fitted, aligned, and adjusted for perfect operation
- End panel installation — exposed cabinet sides finished with matching panels
- Crown moulding and trim — updated or added to complete the transformation
- Final walkthrough and alignment check — every door and drawer tested for smooth operation
- Full cleanup — your kitchen returned the way it was, or better
- 5-year written workmanship warranty — activated at project completion
Sherwood Park Cabinet Refacing Pricing Guide
Pricing is identical to Edmonton — no travel surcharges for Sherwood Park or Strathcona County. Our shop at 9821 33 Ave NW is just 20 minutes from Sherwood Park via Anthony Henday Drive. Typical ranges:
- Small kitchen (10–20 doors) — $5,000–$7,000 in shaker or slab style, 5–7 days
- Average kitchen (20–30 doors) — $7,000–$9,000, the most common size in Nottingham and Westboro
- Executive kitchen (30–50+ doors) — $9,000–$12,000 in Broadmoor Estates and Heritage Hills
- Bathroom vanity refacing — $1,500–$3,500 for single or double vanities
- Pre-sale kitchen refresh — $4,000–$7,000 to modernize a kitchen before listing in Strathcona County’s competitive real estate market
Want to change the colour but keep your door style? Cabinet refinishing in Sherwood Park strips and spray-finishes your existing doors. Need the walls done at the same time? Our interior painting team handles both projects for maximum efficiency.
Cabinet Refacing Across Sherwood Park & Strathcona County
We provide professional cabinet refacing services throughout Sherwood Park, Strathcona County, and all surrounding communities.
Primary Service Area
Executive & Premium Neighbourhoods
Established Neighbourhoods
Also Serving
Sherwood Park, Strathcona County — proudly served by iPaint Painting since 2011
Cabinet Refacing Transformations
Real cabinet refacing projects from Sherwood Park and area homes. See how new doors and hardware completely transform a kitchen.
Before
After
Before
After
Before
After
Before
After
More Ways We Can Help in Sherwood Park
Cabinet refacing is just one of our specialities. Explore our other services to get everything done by one trusted team.
Cabinet Refacing FAQs — Sherwood Park
Straight answers to the questions Sherwood Park homeowners ask most about cabinet refacing costs, timelines, and options.
How much does cabinet refacing cost in Sherwood Park?
Typical Sherwood Park kitchen cabinet refacing costs $5,000–$12,000 depending on kitchen size, number of doors, door style (shaker, slab, raised-panel), material choice, and hardware selection. A standard 20–30 door kitchen in Nottingham or Glen Allan averages $7,000–$9,000. Executive kitchens in Broadmoor Estates or Heritage Hills with 40+ doors typically run $9,000–$12,000. This is significantly less than full cabinet replacement at $20,000–$40,000+ and delivers a completely modern look. Same pricing as Edmonton — no travel surcharge for Strathcona County. Every estimate is detailed, written, and guaranteed.
Are my Sherwood Park kitchen cabinets good candidates for refacing?
Most Sherwood Park homes built between 1985 and 2005 have solid cabinet boxes — plywood or hardwood construction from the builders who supplied Strathcona County’s housing boom. Heritage Hills, Broadmoor Estates, Lakeland Ridge, and Nottingham kitchens typically have structurally sound boxes with dated door styles. If your boxes are square, level, and free of water damage or delamination, refacing is an excellent option that transforms your kitchen at a fraction of replacement cost. During our free in-home consultation, we inspect every box and give you an honest recommendation — we won’t recommend refacing if your boxes need replacing.
How long does cabinet refacing take in a Sherwood Park home?
A typical 20–30 door kitchen in Nottingham or Woodbridge Farms takes 7–10 working days from old door removal to final installation. Smaller kitchens with 10–20 doors in Mills Haven or Glen Allan take 5–7 days. Larger executive kitchens in Broadmoor Estates or Heritage Hills with 40+ doors and island cabinetry take 10–14 days. Your kitchen remains partially functional throughout most of the process — no plumbing disconnects, no countertop removal, no demolition. Our crew is in Strathcona County multiple days each week from our shop just 20 minutes away via Anthony Henday Drive.
What door styles are available for cabinet refacing in Sherwood Park?
We offer shaker (the most popular choice right now — clean lines, recessed centre panel), slab (flat, contemporary, seamless), raised-panel (traditional, dimensional detail), and flat-panel (minimalist, European-influenced) door profiles. Each style is available in solid wood, MDF, or thermofoil finishes in virtually any colour. White and grey shakers are the top sellers across Sherwood Park, followed by navy and forest green. During your free consultation, we bring samples so you can see and feel the door styles in your own kitchen lighting. Call 780-938-9555 to book your free consultation.
What is the difference between cabinet refacing and refinishing?
Cabinet refacing replaces your doors and drawer fronts entirely with brand new ones in a modern style — shaker, slab, or raised-panel — while veneering or finishing existing cabinet box face frames to match. Cabinet refinishing strips your existing doors down to bare wood and spray-applies a new professional finish like catalyzed lacquer or conversion varnish. Choose refacing when you want a completely different door style — for example, converting cathedral-arch oak to clean white shaker. Choose refinishing when you like your door profile but want a new colour. iPaint offers both services across Sherwood Park and all of Strathcona County.
Sherwood Park’s Trusted Cabinet Refacing Team
Whether it’s a full kitchen refacing in Broadmoor Estates, a bathroom vanity update, or just a consultation to explore your options — let’s talk about your Sherwood Park cabinet project. Free estimates, no pressure.