Cabinet Refinishing in Sherwood Park for Every Kitchen Era from the 1970s to Today

Five decades of housing means five distinct refinishing scopes

Sherwood Park sits inside Strathcona County (a separate municipality from the City of Edmonton), with continuous residential build-out from 1970 through 2024 across postal codes T8A, T8B, T8C, T8G and T8H. The major spine roads (Highway 16, Highway 21, Wye Road, Baseline Road and Broadmoor Boulevard) carve the hamlet into era-distinct subdivisions, and the kitchens inside each era subdivision read differently enough that iPaint Painting actually scopes them as five separate refinishing playbooks rather than one.

1970s harvest-gold and avocado, original-owner kitchens (Mills Haven, Glen Allan, Maplegrove)

Mills Haven, Glen Allan and Maplegrove were Sherwood Park's first major subdivisions, built between 1972 and 1979. A real share of those homes are still owned by the original buyers, now in their late seventies and early eighties, who never updated the kitchen because the solid-oak boxes simply kept working. Many of these are first-ever refresh projects. The doors are usually solid oak with a sprayed lacquer in harvest gold, avocado green stain, or a heavily-amber-tinted clear. The lacquer has crystallized and shed grease layers from forty-plus years of cooking. iPaint's process: chemical degrease, full strip to bare wood, grain fill on the open oak panels, shellac-based tannin block primer, bonding primer, then three coats of Benjamin Moore Advance in a soft warm white. The 1970s solid-wood boxes outperform anything sold today at the same price, which is why refinishing makes more sense than replacement for this era.

1980s honey oak with cathedral-arch doors (Foxhaven, Davidson Creek, Westboro, original Broadmoor Estates)

The 1980s Sherwood Park boom across Foxhaven, Davidson Creek, Westboro and the original Broadmoor Estates phases shipped almost universally with cathedral-arch or raised-panel honey oak. This is the single dominant refinishing scope iPaint Painting handles in Sherwood Park (roughly forty percent of bookings). The orange-toned honey finish is the most-dated visual in a Sherwood Park kitchen, and the open oak grain needs the full grain-fill cycle for the topcoat to read flat. Sherwood Park owners overwhelmingly convert these kitchens to soft warm white (Benjamin Moore White Dove, Cloverdale Cloud White, Sherwin-Williams Alabaster) or to a two-tone treatment with white perimeter and a sage, navy or terra cotta island. Range: $6,500 to $10,000 because honey oak grain-fill adds roughly a day and $800 to $1,200 of labour versus a flat-panel MDF refinish.

1990s maple-stained-cherry raised panel (Heritage Hills, Sherwood Heights, Clarkdale Meadows)

The 1990s build-out across Heritage Hills, Sherwood Heights and Clarkdale Meadows brought a shift in cabinet style: maple raised-panel doors finished in a medium-to-dark cherry stain. The tight maple grain hides better than oak, but the cherry stain has yellowed into an orangey-brown that does not match any 2026 trend. These kitchens were also the first Sherwood Park era to ship with 9-foot ceilings, which adds taller upper cabinets and an extra half-day of spray time. iPaint scopes these as stain-to-paint conversions: full strip, sealer over the existing stain residue to prevent tannin bleed, bonding primer, then Sherwin-Williams Emerald Urethane in a cooler greige or a deeper colour like Iron Ore or Tricorn Black. Range: $7,500 to $11,000 depending on door count and ceiling height.

2000s espresso and dark cherry (Aspen Trails, Summerwood, Clover Bar Ranch)

The 2000s Sherwood Park expansion east of Highway 21 produced Aspen Trails, Summerwood and Clover Bar Ranch, the era of espresso, dark cherry and walnut-stained cabinets. These doors are usually slab or simple shaker MDF with a factory-applied stain or pigmented topcoat. The espresso finish reads heavy in 2026 against the lighter colour palettes trending now, and many Sherwood Park families want to brighten the kitchen without changing the layout. iPaint converts these to off-white, mushroom or sage by stripping the topcoat (or applying an aggressive scuff plus blocker primer), bonding-priming, then spray-finishing with Cloverdale Spry Hi-Build. Range: $6,500 to $9,500.

2010s painted MDF and shaker (Lakeland Ridge, Cambrian Crossing, newer Emerald Hills phases)

The 2010s and newer Sherwood Park builds across Lakeland Ridge, Cambrian Crossing and the newer Emerald Hills phases came with factory-painted MDF or shaker maple in builder-grade white, off-white or grey. These are not modernization projects, they are freshening projects. The factory paint has yellowed near south-facing windows, chipped at dishwasher edges, or simply gone bland for younger families pulling colour ideas from Instagram. iPaint re-sprays these in fresh whites, sage, navy or two-tone, using Sherwin-Williams Extreme Bond or Stix bonding primer (not the shellac-based tannin block used on older oak), then Benjamin Moore Advance or Cloverdale Spry. Range: $5,500 to $8,500 depending on whether the project is a same-colour re-spray or a colour change.