How Long Does Cabinet Refacing Take in Westbrook Estates?

Cabinet refacing in Westbrook Estates takes 4 to 6 weeks end to end, broken into a 3 to 6 week door shop lead time plus 5 to 8 business days on-site for a typical 50-door estate kitchen. Westbrook Estates is a southwest Edmonton neighbourhood established in the 1950s and bordered by Whitemud Drive, Terwillegar Drive, 119 Street, and the University of Alberta South Campus Farm, and the housing stock runs larger than city averages. A 25 to 35 door bungalow on 38 Avenue or 40 Avenue lands at the short end (5 to 6 on-site days). A 60 to 80 door custom rebuild on Fairway Drive or Quesnell Crescent with an oversized island and butler's pantry runs the long end (7 to 10 on-site days). Door fabrication at a premium supplier like Conestoga Wood Specialties averages 4 weeks into Edmonton, and your kitchen remains functional most of the on-site window.

Phase 1: Consultation and Template (Week 0)

The project opens with a free on-site consultation at your Westbrook Estates home, typically on 122 Street, Westbrook Drive, or 42 Avenue. Mourad takes a full door and drawer count, identifies species (solid oak, maple, cherry), and documents cabinet box condition. A door style sample pull follows: shaker, slab, raised panel, beaded inset, or French cathedral. The template visit takes one day. After you sign the written estimate, the door order is placed with the shop.

Phase 2: Shop Fabrication (Weeks 1 to 6)

This is the waiting window. Conestoga Wood Specialties in Pennsylvania averages 4 weeks from order to ship, with the range running 3 to 6 weeks depending on species and volume. Painted MDF shaker doors are fastest. Solid walnut, rift-cut white oak, and beaded inset doors sit at the longer end. Hinges (Blum CLIP top BLUMOTION soft-close), drawer runners (Blum TANDEM BLUMOTION full-extension 100 lb load), and matching veneer sheets are ordered in parallel so nothing holds up Phase 3.

Phase 3: On-Site Work (5 to 8 Business Days)

Day 1 starts with door and drawer removal and a full cabinet box clean. Days 2 and 3 are face frame prep: sanding, degloss, filling of old hinge cups, and prime coat. Days 3 and 4 are the veneer application on exposed cabinet ends and face frames, colour-matched to the new door package. Days 5 to 7 are the install sequence: new hinges mounted, new doors hung, new drawer fronts fitted, drawer boxes upgraded (Blum LEGRABOX or solid maple dovetail from DovetailBox Factory). Day 7 or 8 covers final adjustments, alignment, hardware install, and punch list walk. Clear-finished maple and white oak doors arrive pre-finished in M.L. Campbell Krystal post-catalyzed lacquer; painted MDF arrives in Benjamin Moore Advance waterborne alkyd (MPI #66) or Sherwin-Williams Emerald Urethane Trim Enamel at a 30 sheen.

Why Westbrook Estates Kitchens Run Longer Than City Average

A standard Edmonton bungalow carries 20 to 30 doors and reaches 3 to 5 on-site days. Westbrook Estates kitchens carry 40 to 80 doors because of larger home footprints (3,500 to 7,000 plus square feet on Fairway Drive and Quesnell Crescent), butler's pantries, and second prep kitchens common in custom rebuilds near Royal Mayfair Golf Club and Derrick Golf and Winter Club. Each extra door is roughly 10 minutes of install time. A 70-door kitchen adds roughly half a day over a 50-door kitchen. Our crew reaches Westbrook Estates in about 10 minutes via Whitemud Drive from our 9821 33 Ave NW shop. See our Westbrook Estates service area, our cabinet refacing service, our Edmonton cabinet refacing combo, or our pricing estimate page to book a free consultation.